Description
Coe 48″ x .187″ x 20,000-Lb Coil Servo Feed Line
Asset #16312
New Controls in 2021 over $400,000 NEW
Consisting of:
Coe CPCC-20048 Coil Cradle
Coe MCRS Coil Staging & Loading Ramp
Coe CPPS-400-48 7-Roll Coil Straightener (S/N 32202-3) w/ (2) Sets of Power Driven Pinch Rolls, Overhead Loop Support Chute
Coe 48″ Servo Feed w/ ServoMaster Control Console
Coe Press Equipment Corporation
Coe Servo Roll Feed 48″ Wide
Material Specifications
M.C.R.S. – Max: 0.187″ thick @ 48.00″ wide
M.C.R.S. – Max: 0.210″ thick @ 42.00″ wide
M.C.R.S. – Max: 0.250″ thick @ 36.00″ wide
M.C.R.S. – Max: 0.312″ thick @ 12.00″ wide
Machine Specifications
Feed Direction: Right To Left
Pass Line:
Roll Feed Specifications
Number of Rolls: 2
Roll Diameter: 5 Inches
Full Body Width: 24 Inches
Drive Ratio: 5.0:1
Acceleration: 25 Feet/Sec/Sec
Roll Speed: 270 Feet/Minute
Feed Accuracy: +/_ 0.003 Inch
Roll Feed Standard Features
• Sealed Precision Roller Bearings
• Upper and Lower Feed Rolls With #3 Crodon Chrome Finish
• Desk Type Slant Top Control Enclosure – Painted Standard Machine Cream
• 230/460 Volt AC Three Phase Supply Voltage
• 3 Roll Catenary Support Section With Full Sideplates and Funnels
• Air Pressure Regulator for Exact Feed Roll Pressure
• Cluster Gear Driven Upper Feed Roll With Mating Splined Shafts and Gears
• Emergency Stop Push Button
• Fused Electrical Safety Disconnect
• Heavy Duty Cabinet Base with Press Mount Brackets & +1- 6″ of Height Adjustment
• High Performance Maintenance Free AC Brushless Servo Motor
• Partial Width Upper and Lower Feed Rolls
• Remote Jog Pendant
• Rigid Machined Tie Bar Construction for Precise Assembly
• Single Cycle Pushbutton for Set-up at Jog Speed
• ServoMaster Controller
Roll Feed Standard Options
• Dual Roll Hand Crank Edge Guides with Self Centering & Independent Adjustment
Roll Feed Special Options
• Tools free passline adjustment on heavy duty cabinet.
Coe 4.00″ x 48″ Power Straightener, Item No. 2 – CPPS 400
Material Specifications
M.C.R.S. – Max: 0.187″ thick @ 48.00″ wide
M.C.R.S. – Max: 0.210″ thick @ 42.00″ wide
M.C.R.S. – Max: 0.250″ thick @ 36.00″ wide
M.C.R.S. – Max: 0.312″ thick @ 12.00″wide
Equipment Specifications
Payoff Rate: Up To 110 FPM
Air Cylinder Bore: 5.0″
Pinch Roll Dia.: 4.00″
Breaker Roll Dia.: 4.00″
Machine Specifications
Feed Direction: Right To Left
Voltage: 460
Power Straightener Standard Features
• Independent Adjustment of Straightening Rolls Through 2.5 Ton Screw Jacks
• Rigid Tie Bar Construction of Straightener Head
• Upper Straightener Roll Height Scales and Pointers 230/460 Volt AC Three Phase Supply Voltage
• Air Cylinder Raise and Lower of Upper Pinch Roll
• Central Point Lubrication System
• Crodon Coated Upper and Lower Entrance Pinch Rolls
• Electrical Safety Disconnect
• Remote Jog Pendant for Material Threading
Power Straightener Standard Options
• 30 Horsepower AC Variable Speed Drive – Digital Control
• Digital Upper Straightener Roll Height Indicators
• Hand Crank Entrance Edge Guides
• Single Row Upper and Lower Straightener Backup Rollers
Power Straightener Special Options
C Angled top straightener cabinet base.
Reference previous Job 25072
Material to be payed off from a cradle into the angle top straightener.
The overhead loop tunnel will be provided by the customer.
Provide a line layout drawing for material up to .187 x 48 .250 x 36″ .312 x 12″ which indicates recommended loop area of 25 ft.
Single operator station centrally located for the straightener and coil cradle operation.
Includes ultra sonic loop control for automatic operation
Hydraulic Operated Entrance and Exit Pinch Rolls Pressure regulators for the pinch roll pressure. Straightener drive will also power the cradle nest rolls.
SPECIAL • Coil Cradle Model C
Material Specifications
M.C.R.S. – Max: 0.187″ thick @ 48.00″ wide
M.C.R.S. – Max: 0.210″ thick @ wide
M.C.R.S. – Max: 0.250″ thick @ 36.00″ wide
M.C.R.S. – Max: 0.312′ thick @ 12.00″ wide
Machine Specifications
Feed Direction: Right To Left
Equipment Notes
Coil Weight Max: 20,000 lbs
Coil Width Max: 48 Inches
Maximum Coil OD: 60 Inches
Maximum Stock Thickness: .250 x 36 Inches Wide.
Maximum Stock Thickness: .312 x 12 Inches Wide
Maximum Pay off Speed: 1 10 feet [Minute
8 “diameter nest rolls
Hand crank independent inside plate adjustment
(3) side rollers in each side plate.
Hydraulic operated peeler/breaker system for threading material.
Hydraulic system to supply the peeler/breaker and straightener pinch rolls.
The cradle nest rolls will be powered by the straightener drive.
The drive will be mounted inside the strarightener cabinet
Reference Previous Job 25072
Job 32202 Item No- – SPECIAL – Coil Storage and Loading Ramp
Material Specifications
M.C.R.S. – Max: 0.187″ thick @ 48.00″ wide
M.C.R.S. – Max: 0.210″ thick @ 42.00″ wide
M.C.R.S. – Max: 0.250″ thick @ 36.00″ wide
M.C.R.S. – Max: 0.312″ thick @ 12.00″wide
Machine Specifications
Feed Direction: Right To Left Pass Line:
Equipment Notes
Maximum Coil Weight: 20,000 Lbs.
Maximum Coil Width: 48 Inches
Maximum Coil OD: 60 Inches
Maximum Material Thickness: .187 x 48 Inches wide. Maximum Material Thickness: .250 x 36 Inches wide. Maximum Material Thickness: .312 x 12 Inches wide.
Attached to the coil cradle.
Air operated spare coil storage and loading ramp. Handcrank adjustment side plates.
Reference Previous job 25072