Clausing 26" Swing Variable Speed Lathes, Model 821 - NEW

Prices subject to change every 10 days due to economic changes please call us to verify the price!

Clausing/Colchester "The Magnum" Lathe Features

AC Inverter Variable Speed Spindle Drive state of the art AC Spindle Drive featuring surface mount technology to give compact size and high reliability....4 years parts and labor warranty on drive

Interlocked End Guard Door with easy access for maintenance and changing end train gears

Leadscrew Reversing Box for faster thread cutting - reversal of the leadscrew with the spindle running at low speed

Easy to read Index Plate makes it simple to select the proper feed rate or threads

Three Headstock Gear Ranges for a wide spread of constant power - 33 to 1 - better than most CNC lathes

Infinitely Variable Spindle Speeds you can get the right spindle speed very quickly with a response like a CNC lathe, displayed on headstock

Electromagnetic Spindle Brake

Forced lubrication system the spindle bearings, gears and shafts are lubricated by a forced lubrication system

Precision Gamet Tapered Roller Spindle Bearings

Chuck Guard with limit switch

Anti-Friction Carriage Ways. Low-friction "Moglice" PTFE material between the saddle and bed for minimal bedwear and longer machine life

Saddle Mounted Chip Guard and Full Rear Splash Guard

Extra Wide Heavy-duty Cast Iron Bed with triangular webs for exceptional torsional stiffness and excellent chip clearance

Heavy Duty Tailstock for excellent rigidity - with extra heavy-duty quill

Covered Leadscrew protects leadscrew from chips

Wheeled Chip Bin has a large capacity for easy chip disposal

Hardened and Ground Bedways - all bedways are induction hardened and precision ground

Cast Iron Base provides the maximum support for the bed combined with sloping top surfaces to prevent the accumulation of coolant

Clausing/Colchester "The Magnum" 26" VS Specifications

Capacity	Center height from floor	46.65"
	Swing over bed	26.3"
	Swing in gap	35.8"
	Width in front of faceplate	9.44"
	Swing over cross slide	16.9"
	Bedway width	18.9"
Headstock	Spindle bore	4.09"
	Spindle nose (camlock)	D1-11
	Spindle nose taper	8MT
	Number of spindle speeds	3 infinitely variable
	Spindle Speed Range (rpm)	18-1800
	Low range (rpm)	18-200
	Mid range (rpm)	55-605
	High range (rpm)	160-1800
(OPTIONAL) Headstock	Spindle bore	6.1"
	Spindle nose	A2-11
	Spindle nose taper	7MT
	Number of spindle speeds	3 infinitely variable
	Spindle Speed Range (rpm)	15-800
	Low range (rpm)	15-102
	Mid range (rpm)	45-306
	High range (rpm)	118-800
Cross/Top Slide	Travel of cross slide	16"
	Width of cross slide	11"
	Travel of top slide	6.5"
	Width of top slide	7"
Tailstock	Quill travel	12"
	Quill diameter	4.125"
	Quill taper	6MT
Feeds & Threading	Longitudinal feed range	0.002-0.16in/rev
	Cross feed range	0.001-0.08in/rev
	Number of inch pitches	51
	Range of inch pitches	2-84 TPI
	Number of metric pitches	59
	Range of metric pitches	0.2-14mm
	Number of diametral pitches	27
	Range of diametral pitches	8-72
	Number of module pitches	20
	Range of module pitches	0.2-3.5
Motor	Spindle motor	30 hp

Clausing/Colchester "The Magnum" 26" VS Specifications Cont.

Dimensions	8215VSJ	26" x 60" Gap Bed
	Length x Height x Width	151" x 70.8" x 74.8"
	Weight	8,800 lbs.
	8216VSJ	26" x 80" Gap Bed
	Length x Height x Width	171.2" x 70.8" x 74.8"
	Weight	9,460 lbs.
	8219VSJ	26" x 120" Gap Bed
	Length x Height x Width	210" x 70.8" x 74.8"
	Weight	11,220 lbs.

Standard Features

Spindle Center Bushing

Two MT Centers

Splash Guard

Chuck Guard

Leadscrew cover

Coolant System

Inch Threading Dial

Set of Wrenches and Keys

Instruction and Parts Manual

Accuracy Chart

Emergency Stop Button

Lockable Isolator Switch

One Shot Saddle and Cross Slide Lubrication

Forward/Reverse/Stop Switch

Standard 230/3/60 or 460/3/60 Volts (208/3/60 volts Require a Transformer)

Lathes

Kingston HJ-1700 (3") 17" x 67" High Precision Lathe, 3" Spindle Bore - 3PH /440 Volts

LeBlond 19” x 50” Regal Lathe, 1 49/64” Spindle Bore

LeBlond 40" x 220" Lathe, Model 3220-28, 2 1/16” Spindle Bore

Clausing Lathe 15"x30" Engine Lathe

Clausing Metosa 13” x 40” Geared Head Lathe, Model C1340S

Clausing Metosa 13” x 40” Geared Head Lathe, Model C1340S

LeBlond Makino 26” x 72” Lathe, 5 ¼” Spindle Bore, Model 26/5 HS

LeBlond 32” x 192” Lathe, 2 1/16” Spindle Bore, Model 3220

Clausing 15" Swing Geared Head Gap Bed Lathe, Model 804 - NEW

Clausing 1500 Lathe

LeBlond 32” x 144” Regal 24” Hollow Spindle Lathe with 3” Raise Head

Harrison 18” x 60” Gap Bed Lathe, Model M460

LeBlond 24” / 54” x 96” / 132” Sliding Gap Bed Lathe

Clausing 15" Variable Speed Gap Bed Lathe, Model 804 - NEW

Clausing 18" Swing Variable Speed Lathes, Model 805 - NEW

Romi 26" x 160" Lathe, model EH-40A

Standard Modern 20" x 80" Lathe, Model 2080 - NEW

Clausing Metosa 13” x 40” Geared Head Lathe, Model C1340S

Clausing 26" Swing Variable Speed Lathes, Model 821 - NEW

Clausing Metosa 13” x 40” Geared Head Lathe, Model C1340S