Description
Chicago Hydraulic Leaf Box & Pan Brake, HBPU
SKU: 4530000
Hydraulic Power Bending Brake – Box & Pan
One general purpose motor with direct mount hydraulic pump for operation on 220/440 volts, 3 phase, 60 hertz, with 110 volt control circuit (please specify voltage).
STANDARD EQUIPMENT on each Chicago Hydraulic Power Bending Brake:
- Removable Nose Bar.
- Bolted Bottom Bar.
- Compact Hydraulic Power Unit.
- Angle Bar.
- Insert Bar.
- Oil Level Sight Gauge.
Control Panel Features:
- On/Off Key Selector Switch.
- Bending Leaf Up/Down Pushbuttons.
- Clamp/Unclamp Pushbuttons.
- Motor Start Pushbutton.
- Emergency Stop Push Button.
- Automatic Cycle Push Button.
Electric Foot Switch – Clamps and unclamps Top Leaf. Allows operator mobility when loading and unloading material.
Bend Angle Dial Adjustment – Adjustable cam and scale that read in degrees, actuates an electric limit switch for bend angle control and repeatability of bends.
Material Thickness Dial Adjustment – Reference scale for speedier set up when adjusting clamping pressure.
Back Gauge – 25 1/2″ travel, rack and pinion type gauge with hand wheel adjustment on right side of machine. Inch/Cm scales.
Model | Bending Length | Capacity Mild Steel | Capacity Stainless Steel | Motor HP | Shipping Weight | Dimensions | |
---|---|---|---|---|---|---|---|
HBPU 412-6 | 48″ | 12 GA | 16 GA | 2 | 2800 lbs | 78″ x 48″ x 54″ | |
HBPU 612-6 | 72″ | 12 GA | 16 GA | 2 | 3300 lbs | 102″ x 48″ x 54″ | |
HBPU 812-6 | 96″ | 12 GA | 14 GA | 3 | 4700 lbs | 125″ x 48″ x 57″ | |
HBPU 810-6 | 96″ | 10 GA | 14 GA | 5 | 6400 lbs | 126″ x 48″ x 57″ | |
HBPU 1014-6 | 120″ | 14 GA | 18 GA | 2 | 5500 lbs | 150″ x 48″ x 57″ | |
HBPU 1012-6 | 120″ | 12 GA | 16 GA | 5 | 6900 lbs | 150″ x 48″ x 57″ | |
HBPU 1010-6 | 120″ | 10 GA | 14 GA | 5 | 8800 lbs | 160″ x 48″ x 72″ |