Description
Akyapak 5″ x 5″ Angle Roll, Model APK121 – NEW
Asset #15913N
Serial # 121266
480V
Equipped with:
- APK 121 Angle Bending Roll
- Machine body is steel (ST-52) construction
- On APK121 rolls are driven by a hydraulic motor+planetary gearbox and gears
- Shafts made of special steel, hardened and grounded
- APK121 guide rolls are adjustable manually in one direction
- One set standard rolls
- Manual lubrication
- Lower rolls hydraulic moveable up and down
- Digital display for lower rolls
- Separate and moveable control panel
- Horizontal & vertical working
- Suitable for CE
| TECHNICAL DETAILS
Roll Diameter Ø inch 15.35” Max Section Modulus 4.3-7.3″ Shaft Ø inch 4.72” Rolling Speed ft/min 13’ per/min. Motor Power hp 20 Length Ft 6.5′ Height Ft 6.7’ Width Ft 4.8’ Weight Ibs 10,405 |
| Bend Type | Size | Diameter
min Ø |
Dies |
| Angle Leg Out | L2x2x3/16″ L4x43/8″ L5x5x1/2″ |
28 40 55 |
AE F F |
| Angle Leg In | L2x21/4″ L3x3x5/16″ L4x4x1/2″ |
26 35 44 |
AE |
| T Section Leg Out | WT5 | 48 | A |
| T Section Leg In | WT5 | 48 | A |
| T Section Leg Side | WT5 | 51 | A |
| Flat, Hard Way | 1-1/2″x3/8″ 5×1″ |
20 60 |
AF |
| Flat, Easy Way | 8×2″ | 40 | |
| Square | 3 | 32 | AF |
| Round | 3-3/8″ | 36″ | B |
| Tube | 2×0.79″ 6-1/4″x0.157″ |
24” 118” |
B |
| Pipe | 5″ SCH40 | 70 | B |
| Rectangle Tube | 2×5-1/2×0.196″ | B | |
| Square Tube | 3-1/2×0.312 | B | |
| Channel Easy Way
Legs Out |
C8x22.8# | 40” | AD F |
| Channel Easy Way
Legs In |
C8x22.8# | 40” | AD F |
| Beam Easy Way | W6x20# | 51” | AD F |
| Beam Easy Way | S5x10# | 98 | F |
| Channel Hard Way | C5x9# | 315 | CB |
| Beam Hard Way | S5x14.75# | 98 | CB |
| Beam Hard Way | W4x13# W6x16# |
102 59 |
CB |