Description
Akyapak 2″ x 3/16″ Angle Bending Roll, Model APK 35
Asset # 15472
Serial #351748
Equipped With
- APK 35 Angle Bending Roll
- Machine body is steel (ST-52) construction
- On APK35 rolls are driven by a hydraulic motor+planetry gearbox and gears
- Shafts made of special steel, hardened and grounded
- APK35 guide rolls are adjustable manually in one direction
- One set standard rolls
- Manual lubrication
- Lower rolls hydraulic moveable up and down
- Digital display for lower rolls
- Separate and moveable control panel
- Horizontal & vertical working
- Suitable for CE
TECHNICAL DETAILS
Roll Diameter Ø inch 5.90”
Shaft Ø inch 1.97”
Rolling Speed ft/min 14’ per/min.
Motor Power hp 1.5 kw
Length Ft 2.7’
Height Ft 4.9’
Width Ft 4.4’
Weight Ibs 705
Bend Type | Sizeinch | Diametermin Ø | Dies |
Angle Leg Out | 1-31/32 x 0.19685” | 33.5” | BC |
Angle Leg In | 1-31/32 x 0.19685” | 48” | BC |
T Section Let Out | 31/32” | 25.9” | A |
T Section Leg In | 31/32” | 35.4” | A |
Flat, Hard Way | 2.33” x 0.393”1 31/32” x .472” | 31.5” | A |
Flat, Easy Way | 4-3/4” x 0.59” | 29.5” | A |
Square | 1-3/8”.787” | 48”15-3/4” | B |
Round | 1.38” | 31.5” | A |
Tube | 2-3/4” x 0.0787” | 48” | B |
Pipe | 1.3” x 0.104 | 9” | B |
Rectangle Tube | 1 31/32” x 1.57” x .118” | B | |
Square Tube | 2.36” x .118” | B | |
Channel Easy WayLegs Out | UNP60 | 31.7” | B |
Channel Easy WayLegs In | UNP60 | 27.6” | B |
Explanation:
A: Standard Rolls
B: Special Rolls
C: Pulling Device
D: For bending without deformation
E: Angle Device
F: Stretching Device