Marvel Model SA-330WPC Horizontal Saw - NEW

Asset #16210N

Serial #DSA330WPC-181

SPECIFICATIONS
Capacity 45 Degrees - Rectangle                                           11" x 13"
Capacity 45 Degrees - Round                                                11"
Capacity 90 Degrees - Rectangle                                           13" x 16"
Capacity 90 Degrees - Round                                                13"
Minimum Round Remnant                                                     9"
Blade Size                                                                               13" 6-1/2" x 1" x .035"
Speed Range                                                                           95 - 295 SFPM
Blade Drive                                                                             5 H.P.
Hydraulic Pump                                                                      1/2 H.P.
Coolant Pump                                                                         1/8 H.P.
Packing Size                                                                           90" x 86" x 68" Machine Weight       2904 lbs.net / 3190 lbs. Gross

Mitering: Manually positioned to 45°right, equipped with degree scale.

Blade Tension: Hydraulically controlled tension provides consistent square cutting accuracy. The motion detector will shut the machine off should the blade break or stall.

Speed Range:Blade speed is variable through an inverter drive and a heavy-duty worm gear transmission. Blade speeds are 65 - 330 SFPM. The broad speed range allows for optimum cutting of a large variety of materials. An electric tachometer assures accurate speed setting.

Hydraulic Down Feed: Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator's station.

Hydraulic Shuttle Feed: Length settings of 0 - 27.6" are accomplished with simple programming at the operator's touch screen. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is ± .005 per index.

PC Programmable Control: Conveniently located on the operator's control panel, this touch screen control allows the operator to program and store up to ten jobs. Inputs include Part Length from 0 to 393.33" (in inches up to 3 decimal places) and Number of Pieces to be cut. The Blade Speed is displayed on and set using the touch screen, but is not stored in memory. The Automatic Piece Counter stops each job when the pre-set number of cuts has been made. The control provides the option of running up to 10 jobs consecutively.

Out-of-Stock Switch: The machine will shut off automatically when material is no longer present in the rear vise jaws, allowing for truly automatic operation.

Blade Guides: The combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of ± .002 per inch of cut material.

Fast Approach:Work height is manually set allowing the head to rise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.

Chip Brush: Powered from the main drive wheel of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life.

Full Stroking Hydraulic Vise Jaws:Holding the work piece on both sides of the blade reduces blade vibration, providing more accurate cuts and longer blade life. Rear Vise: The rear vise jaw floats hydraulically to accommodate crooked stock assuring straight, accurate cuts.

Operators Control Panel: Conveniently mounted on the right hand side of the machine and offers full control of all machine functions such as; Vises, Blade Speed, Saw Frame, Bundle Clamping, Parts Counter, Shuttle Advance & Retract, Coolant and Work Light.

Work Light: Positioned directly over the work area to provide better illumination of the cutting area, the work light can be turned on and off independently from the operator's control panel.

Included Accessories:

PA19111 - Automatic Chip Removal

Model		SA330WPC
Cutting Capacity	Round (Diameter) at 90°	13"	330 mm
	Round (Diameter) at 45°	11"	280 mm
	Rectangle (W x H) at 90°	16" x 13"	406 x 330 mm
	Square at 90°	13" X 13"	330 x 330 mm
	Rectangle (W x H) at 45°	15" x 15"	380 x 380 mm
Work Load Capacity
Saw Blade	Blade Size (L x T x W)	13'7" x 0.035" x 1"
	Blade Speed	95-295 SFPM	29-90 m/min
	Tension Control	Hydraulic
Blade Control	Top Limit Setting	Manual Setting
Blade Control	Cutting Control	Hydraulic Flow Control Valve
Vise Operation	Type	Main and Rear Vise
Vise Operation	Control	Hydraulic Full-Stroke Cylinder
Motors	Saw Blade	5 HP	3.7 kW
	Hydraulic Pump	1/2 HP	0.37 kW
	Cutting Fluid Pump	1/8 HP	0.06 kW
Power Requirement	Power Supply Voltage	AC230V±10% or AC460V±10%, 3 PH, 60 Hz,Required at Factory Voltage Setting
Power Requirement	Power Requirement
Cutting Fluid	Tank Capacity	14.5 gal	55 liters
Hydraulic	Tank Capacity	4.0 gal	15 liters
Hydraulic	Pressure Setting
Chip Disposal		Chip Conveyor
Material Index	Index Mechanism	Shuttle Vise
	Stroke	15.7"	400 mm
	Length
	Number of Input Block/Station
	Number of Cut-Off Pieces
	Remnant Length
Machine Dimensions (W x L x H)	Head-Up Position	110.5" x 94.3" x	2807 x 2395 x
Machine Dimensions (W x L x H)	Head Down Position	110.5" x 94.3" x 65.5"	2807 x 2395 x 1665 mm
Table Height		27.6"	700 mm
Machine Weight		3,175 lbs	1,440 kg

Saws_horizontal

Tannewitz Horizontal Saw

Clausing Kalamazoo 13" x 19.6" Automatic NC Swivel Horizontal Saw, Model MS1319NC - NEW

Marvel Spartan 22" x 28" Semi Automatic Horizontal Saw, Model PB2228 - NEW

Ellis 10" x 11" Horizontal Saw, Model 1600 - NEW

W.F. Wells 25" x 40" CNC Fully Automatic Horizontal Saw, Model B-25-3A3-CNC - NEW

Marvel 15" x 24" Heavy Duty Miter Horizontal Saw, Model SA460WPC - NEW

Amada Marvel HFA360P Horizontal Dual Post Saw - NEW

Ellis 9" x 10" Horizontal Saw, Model 1600 - NEW

Marvel Spartan Model SA330WPC Horizontal Saw - NEW

Behringer HBE321A Dynamic Horizontal Bandsaw, 13.8 x 12.6 in Capacity

Marvel Hercules 12" x 18" Horizontal Swivel Saw, Model S330/2-HV - NEW

Clausing Kalamazoo 43.3" 51.2" Semi-Automatic Horizontal Saw, Model H4351SA - NEW

W.F. Wells 7" x 11" Horizontal Saw, Model AC-7 - NEW

Marvel Spartan 14" x 14" Heavy Duty Horizontal Saw, Model PB 360 - NEW

Ellis 11" x 10" Horizontal Saw, Model 1800 - NEW

Ellis 11" x 10" Horizontal Saw, Model 1800 - NEW

Ellis Stock Stand for Model 1800's and 2000's – 5’ Long, 4-Rollers, PN 6228

Ellis 9" x 10" Horizontal Saw, Model 1600 - NEW

DoAll 28" x 30" Dual Column Enclosed CNC Bandsaw, Model DC-750CNC - NEW

DoAll 15.75" x 13" Production Horizontal Saw, Model DC-330NC - NEW