Clausing 15" Swing Geared Head Gap Bed Lathe, Model 8043SS - NEW 440V

Asset #17868N

Serial # ZF1025

Clausing/Colchester Geared Head Lathe Features
All head stock gears are hardened and ground
Spindle bearing, gears and shafts are lubricated by a forced lubrication system
An easy-to-read index plate makes it simple to select the proper feed rate or thread
The apron has hardened and ground gears and are lubricated in a bath of oil
Extra wide bed provides accuracy and minimal wear
Easy access pull-out rolling chip bin
Precision Gamet tapered roller spindle bearings
Equipped with chuck guard, full splash guard and leadscrew cover
Clutch drive, reverse leadscrew with spindle turning for faster thread cutting
Clutches are operated by levers at apron and headstock for forward/reverse
A one year warranty and backed by the Clausing Service Center dedicated to support our customers with parts and service

Clausing/Colchester Geared Head Specifications
Capacity
Height of center 7.68"
Swing over bed 15.75"
Swing in gap 23"
Width in front of faceplate 6.5"
Swing over cross slide 9.7"
Bedway width 12.5"

Headstock
Spindle bore 2.12"
Spindle nose (camlock) D1-6
Spindle nose taper 4MT
Number of spindle speeds 16
Spindle Speed Range (rpm) 25-2000
Cross/Top Slide
Travel of cross slide 9.8"
Width of cross slide 7.09"
Travel of top slide 5.1"

Width of top slide 3.93"
Tailstock
Quill travel 5.5"
Quill diameter 2.8"
Quill taper 5MT

Feeds & Threading
Longitudinal feed range 0.0014"-0.048" in/rev
Number of inch pitches 56
Range of inch pitches 2-56 TPI
Number of metric pitches 51
Range of metric pitches 0.2-14mm
Number of diametral pitches 20

Feeds & Threading
Range of diametral pitches 8-56 DP
Cont. Number of module pitches 20
Range of module pitches 0.2-3.5 MOD
Motor Spindle motor 7.5 hp
Dimensions Swing & Center Distance 15" x 50" / 15" x 25′

8043 - 15" x 50" VS Gap Bed Lathe, Dimensions 99" x 63" x 44", 3,300 lbs.

Standard Equipment
Chuck Guard Accuracy Chart
Covered leadscrew
Electric coolant pump, tank and fittings
Emergency stop button
End guard limit switch
Forward/Reverse/Stop switch
Lockable isolator switch
Splash guard
Tee slotted top slide
One shot saddle and cross slide lubrication
Pullout chip bin
Thread indicator
Tool box with wrenches and dead centers
Instruction and spare parts manual
460 volts phase 60 Hz

Inventory

Clausing 15"x 50" Gear Head Lathe, Model 8043SS - NEW