Marvel Spartan 60 Ton Ironworker, Model MISW60D – NEW

Availability :


SKU: 12766
$14,500.00
Compare
Categories: ,

Marvel Spartan Model MSIW60D Ironworker, 60 Tons – NEW

Punching:
Punch Pressure:      60 Tons
Standard Tooling    1/2” in 1/2”
Large Tooling    1-1/2” in 3/8”
Oversize Tooling    4” in 1/8”
Throat Depth      10”
Stroke Length     2-5/16”
Cycles per Minute in 3/4”    25
Punching Station Work Height    40-9/16”
Punch Holder and Jog Mode
Punch Work Table: Includes back gauge and adjustable stops.
Adjustable See-Through Punch Stripper: For fast and easy setup.
Die Holder:  Adjustable in machined T-slots for quick punch and die alignment.

Flat Bar Shearing:
Flat Bar Shear Capacity    7-7/8″ x 2”
Width x Thickness    11-3/4” in 19/32”
Lower Blade    Four (4) usable edges
Blade Length    12-1/2”
Angle Flange Trim    3-5/32” x 19/32″
Flat Bar Shear Work Height    35-7/16”
Support Table:  Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right.
Adjustable Hold-Down:  Holds work piece securely in position when shearing.
Upper Shear Blade:  Provides for minimum distortion.  Two (2) usable edges.

Angle Shearing:
90 degrees    4-3/4” x 4-3/4” x 1/2”
45 degrees    2-3/4″ x 3/8″
Work Height    44-1/2″
Shearing with no material loss and minimum deformity
Shear Blades:  Four (4) usable edges.

Bar Shearing:
Round Bar Capacity    1-1/2”
Square Bar Capacity    1-1/2”
Channel Shear    4-3/4″ x 2-1/4″
H Beams    4-3/4″ x 2-1/4″
T Beams    3-5/32″ x 5-16″
Work Height    35-7/16″
Notching:
Rectangular Notcher    3/8” x 1-3/4” x 3-9/16”
Large Vee    4″ x 4″ x 3/8″
Notcher Work Height    35-7/16”

Special Tooling:
V Press Brake    9-7/8″ x 1/2″
Multi Vee    19-5/8″ x 1/8″

Other Standard Equipment   Five (5) Sets Of Punches And Dies:
Punches:  9/16”, 11/16”, 13/16”, 15/16”, 1-1/16”
Dies:  19/32”, 23/32”, 27/32”, 31/32”, 1-3/32”
CPD Series:  26 punch, 62 die.
Magnetic Base Work Light
Adjustable Electric Back Gauge (36”)
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch
Two (2) Full-Control Foot Pedals
Two (2) Hole Die Holders
Two (2) Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230/460 Volt, 3 Phase, 60Hz
 
Additional Specifications:
Motor Drive: 7.38 H.P
Weight: 3351 lbs.
Power (Pressure): 60 Tons.
Dimensions (LxWxH): 59″ x 37-3/8″ x 74″

Preliminary Specifications – Subject to Verification

Tonnage

60 Tons

Delivery

In Stock at Vander Ziel Machinery

Manufacturer

Log in to your customer account to request a product quote.
Login or Register Here!

Similar Ironworkers

Demo