Marvel 15” x 24” Horizontal Mitering Saw, Model SA460WPC
Serial # FSA460WPC-099
Asset # 13856
Capacity: 90° Rectangle 15” x 24”, Round 18”
Capacity: 45° Rectangle 15” x 15”, Round 15”
Mitering Manually positioned to 45° right, with degree scale.
Pass Line Height 36.5”
Blade 1-1/2” x .050” x 17-6”
Machine Weight 5700 lbs.net / 6000 lbs. gross (on a skid)
35,000 PSI. Hydraulically controlled tension provides consistent square cutting accuracy. The motion detector will shut the machine off should the blade break or stall.
65 – 330 SFPM (20 – 101 m/min) infinitely variable through an inverter drive and a heavy-duty worm gear transmission. The broad speed range allows for optimum cutting of a large spectrum of materials. An electric tachometer assures accurate speed setting.
Hydraulic Down Feed
Feed rate and down pressure can be controlled independently for fast, accurate cutting. Setup is made easy through the color-coded dial allowing the operator to select the optimum setting for the type of material being cut. Both settings are made at the operator’s station.
Hydraulic Shuttle Feed
Length settings of 0 – 27.6” are accomplished with simple programming at the operator’s touch screen. The shuttle comes to positive stops at both ends of the index, assuring cutoff length accuracy, reducing material loss. Repeatability is ± .005 per index.
PC Programmable Control
Conveniently located on the operator’s control panel, this touch screen control allows the operator to program and store up to ten jobs. Inputs include Part Length from 0 to 393.661” and Number of Pieces to be cut. The Blade Speed is displayed on and set using the touch screen, but is not stored in memory. The Automatic Piece Counter stops each job when the pre-set number of cuts has been made. The control provides the option of running up to 10 jobs consecutively.
Blade Drive: 5 H.P., Hydraulic Pump Motor: 1 H.P., Coolant Pump Motor: 1/6 H.P. – All motors are dual voltage, choose either 230 or 460 volt, 3 ph. 60 Hz.
The machine will shut off automatically when material is no longer present in the rear vise jaws, allowing for truly automatic operation.
The combination roller bearing and carbide blade guides reduce heat and blade stress providing longer blade life and accuracies of ± .002 per inch of cut material.
Work height is manually set allowing the head to rise just enough to clear the work piece, reducing cycle time and allowing for faster cutting performance.
Powered from the main drive wheel of the saw, the brush changes speed along with the blade to assure that chips are being removed from each gullet of the blade, improving cutting performance and blade life.
Full Stroking Hydraulic Vise Jaws
Holding the work piece on both sides of the blade reduces blade vibration, providing more accurate cuts and longer blade life.
The rear vise jaw floats hydraulically to accommodate crooked stock assuring straight, accurate cuts.
Operator’s Control Panel
Conveniently mounted on the Right hand side of the machine and offers full control of all machine functions such as; Vises, Blade Speed, Saw Frame, Bundle Clamping, Shuttle Advance & Retract, Coolant and Work Light.
Positioned directly over the work area to provide better illumination of the cutting area, the work light can be turned on and off independently from the operator’s control panel.
Preliminary Specifications – Subject to Verification
No videos are associated with this product
15" x 24"
|Additional Voltage Info||460/3/60|
Log in to your customer account to request a product quote.
Login or Register Here!
Similar Horizontal Saws
Can't Find It?Click to FIND MACHINERY