Marvel Model 2150A-PC3S-60 Vertical Tilt-Frame Saw – NEW
Marvel Model 2150A-PC3S-60 Vertical Tilt Frame Saw – NEW
Asset # 14191N
Capacity Rectangles Rounds
Nominal 20″ x 25″ (508 mm x 635 mm) 20″ (508 mm)
Blade at 45 o 20″ x 17″ (508 mm x 432 mm) 17″ (432 mm)
Blade at 60 o 20″ x 11.25″ (508 mm x 285 mm) 11.25″ (285 mm)
Blade Drive: Electric with sensorless vector control for smooth acceleration and full torque.
Speed Range: Infinitely variable: 500 FPM (9 to 152 m/min), 10 HP Standard. Blade speed can be automatically set when material is selected.
Tilting Column: For miter cutting up to 60o left and right of vertical. Electronic tilt- The column is electrically powered, chain driven, with encoder feedback and MARVEL PC3 touch screen controller for precision miter positioning.
3° Canted Column: Standard 3-degree forward approach angle for increased efficiency in cutting of structural materials.
(Non Canted option available for $2,100.00 additional) If the non-canted option is required with a 1.25” blade, the 2150M or 2150PC3 order must specify that the 1.25” blade is required with the non-canted option.
Feed Force: Direct Force Sensing Electric Ball Screw Feed 0 – 350 lbs. (1560 N); column travels on recirculating linear ball ways. Feed pressure can be automatically set when material is selected.
Blade: 18′ 2″ (5537 mm) long x 1.5″ (41 mm) wide, .05″ (1.27 mm). One Welded-Edge Band is furnished with each machine as part of standard start-up supplies.
Blade Guides: Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self tensioning design.
Blade Tension: Hydraulically controlled, 45,000 psi. max. (310 MPa). Machine equipped with automatic blade break/blade stall shut-off switch.
Upper Blade Guide Arm: Hydraulically positioned and locking, controlled by selector switch at operator’s station.
Vises: Hydraulic, full stroking with 9-1/2” high x 15” wide 60o faceplates. Optional variable vise pressure available (Option Code M9A).
Coolant System: Built-in with Flood system (60 Gallon Capacity), available with Drop Lubrication system (requires compressed air connection) (Option codes ML1 & ML2), including chip pan with chip removal ramp (optional Manual or power Chip Conveyors available).
Work-Rest Rollers: Two turned ball bearing rollers, one on the entry side and one on the discharge side of the machine bed.
Flushing Hose: Washes away chips from hard-to-get-at places reducing clean-up time.
Automatic Bar Feed: The Automatic Bar Feed design features a 48” stroke length with indexing speeds of up to 60 ft./min., and creep speeds of 33 in../min. The bar feed vise is servo driven with encoder feedback, and combines precision double ball screws with preloaded recirculating linear guides, resulting in positioning accuracy of +/- .005” per index. The vise itself is hydraulically clamped to prevent material slippage. Optional outboard and second machine vises are available (must specify right or left hand machine configuration at the time of order – Option Codes F3 & F4).
MARVEL PC3 PROGRAMMABLE CONTROL®: Provides a Programmable Logic Control Unit with a 12” color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as a material selection chart and customizable material library. Both blade speed and feed force are automatically set according to material type for optimal cutting performance. Job programming consists of setting the cut-off length, angle and number of pieces to be cut. Additional features include Inch/Metric capability, out-of-stock shut down device, a fast cut job option and expanded memory storage using removable media. Also includes Jammed Blade Protection that senses resistance as the column returns and stops to prevent blade damage.
Material can also be fed through the machine manually in both directions using the hydraulic shuttle vise. Blade can be stopped with all other power functions operative.
Standard Left-to-Right Work Entry: Opposite Hand – RIGHT-TO-LEFT work entry available (Modification M4A).
Table Height: 40”
Motors: Main Drive: 10 H.P., 1800 RPM, totally enclosed, fan cooled, ball bearing.
Coolant Pump: 1/8 H.P. (.1 kW), I.P. 54 Rating, totally enclosed motor built-in integrally.
Hydraulic Pump: 5 H.P. (3.7 kW), 1800 RPM, totally enclosed fan cooled, ball bearing, system pressure 900 psi (6.2 MPa).
Controls: IEC fused disconnect switch and magnetic motor starters with overload and low-voltage protection. Power supply provides low voltage (24 volts DC) control to all push buttons at operator’s control panel and machine lighting circuits. PLC control and drives mounted in moisture tight compartment with vibration isolation mountings. Electrical Equipment conforms to National Electrical Code NFPA 79. The Electrical Control Panel is U.L. Labeled.
M9A Variable Vise Pressure
Marvel F12L Work Lift Roller Left Side
Marvel M8M Manual Chip Conveyor
Marvel F3 Outboard Vise
Marvel F4 Second Machine Vise
No videos are associated with this product
20" x 25"
On Order – Shipment Pending
|Additional Voltage Info||460/3/60|
Log in to your customer account to request a product quote.
Login or Register Here!
Similar Tilt-Frame Saws
Can't Find It?Click to FIND MACHINERY