Clausing 15″ x 50″ Lathe, Model 8043 – NEW

Availability :

SKU: 13965

Clausing 15″ Swing Geared Head Gap Bed Lathe, Model 8043 – NEW

Asset # 13965
Serial # TG1027

Clausing/Colchester Geared Head Lathe Features
  • All head stock gears are hardened and ground
  • Spindle bearing, gears and shafts are lubricated by a forced lubrication system
  • An easy-to-read index plate makes it simple to select the proper feed rate or thread
  • The apron has hardened and ground gears and are lubricated in a bath of oil
  • Extra wide bed provides accuracy and minimal wear
  • Easy access pull-out rolling chip bin
  • Precision Gamet tapered roller spindle bearings
  • Equipped with chuck guard, full splash guard and leadscrew cover
  • Clutch drive, reverse leadscrew with spindle turning for faster thread cutting
  • Clutches are operated by levers at apron and headstock for forward/reverse
  • A one year warranty and backed by the Clausing Service Center dedicated to support our customers with parts and service

 Clausing/Colchester Geared Head Specifications

Capacity Height of center 7.68”
  Swing over bed 15.75”
  Swing in gap 23”
  Width in front of faceplate 6.5”
  Swing over cross slide 9.7”
  Bedway width 12.5”


Spindle bore 2.12”
  Spindle nose (camlock) D1-6
  Spindle nose taper 4MT
  Number of spindle speeds 16
  Spindle Speed Range (rpm) 25-2000
Cross/Top Slide Travel of cross slide 9.8”
  Width of cross slide 7.09”
  Travel of top slide 5.1”
Width of top slide 3.93”
Tailstock Quill travel 5.5”
  Quill diameter 2.8”
  Quill taper 5MT

Feeds & Threading

Longitudinal feed range 0.0014”-0.048” in/rev
  Number of inch pitches 56
  Range of inch pitches 2-56 TPI
  Number of metric pitches 51
  Range of metric pitches 0.2-14mm
  Number of diametral pitches 20

Feeds & Threading

Range of diametral pitches 8-56 DP
Cont. Number of module pitches 20
  Range of module pitches 0.2-3.5 MOD
Motor Spindle motor 7.5 hp
Dimensions Swing & Center Distance 15” x 50” G/H Gap
  Length x Height x Width 99” x 51” x 44”
  Weight 3,300 lbs.

Standard Equipment

  • Chuck Guard Accuracy Chart
  • Covered leadscrew
  • Electric coolant pump, tank and fittings
  • Emergency stop button
  • End guard limit switch
  • Forward/Reverse/Stop switch
  • Lockable isolator switch
  • Splash guard
  • Tee slotted top slide
  • One shot saddle and cross slide lubrication
  • Pullout chip bin
  • Thread indicator
  • Tool box with wrenches and dead centers
  • Instruction and spare parts manual
  • 208/230 or 460 volts phase 60 Hz (other voltages may require a transformer)

No videos are associated with this product


Swing Over Bed


Distance Between Centers



In Stock at Vander Ziel Machinery

Additional Voltage Info460/3/60

Log in to your customer account to request a product quote.
Login or Register Here!