Clausing 13″ Swing Geared Head Gap Bed Lathes, Model 802- NEW

Availability : In Stock at Manufacturer


SKU: 0711006
$18,125.00$19,445.00

Clausing 13″ Swing Geared Head Gap Bed Lathes, Model 802- NEW

to request a product quote. Or Register Here!

SKU: 0711006 Categories: ,

Description

Clausing 13″ Swing Geared Head Gap Bed Lathes, Model 802- NEW

Prices subject to change every 10 days due to economic changes please call us to verify the price!

SKU: 0711006

Clausing/Colchester Geared Head Lathe Features
  • Headstock: The rugged headstock is designed to provide maximum power for roughing cuts, and smooth, quiet power for fine finishing. The 12 all-geared speeds, from 40 to 2500 rpm, handle a wide variety of work at top efficiency.  All headstock gears are hardened and ground, and headstock shafts are splined and turn on anti-friction bearings.  Increased mass and rigidity of the headstock mean much less transmission noise, and less deflection than previous models.  Spindle bearings, gears, shafts, and headstock clutches are lubricated by a pumped bath of oil.
  • Universal Gear Box: A broad range of Feed and Thread selections is available by using three selector levers and an 8-position rotary dial. Feed selections automatically disengage the leadscrew drive and independent torque-limiting clutches give accidental overload protection on both the leadscrew and spline shaft. All gears are hardened, and shafts turn on anti-friction bearings.
  • Bed and Base: The sturdy bed is manufactured from close-grained cast iron, which is induction hardened and ground.  The combined vee and flat configuration gives optimum kinematic guiding of the slideways…allowing both precise, accurate machining, and vibration-free cutting.  The control base is rigidly constructed, and incorporates a readily accessible coolant tank mounted at the rear of the machine.
  • Apron, Saddle, and Slides: For optimum precision, the cross slide runs along a dovetail guide, and both saddle and cross slide are provided with adjustable gib strips. For heavy cutting, either the saddle or cross slide can be locked, and anti-backlash adjustment is provided on the cross slide nut.  Bed wipers and an apron mounted one-shot lubrication pump are provided as standard.  The cast iron apron is totally enclosed and splash bath lubricated.  A double halfnut assembly is provided for maximum life and screwcutting accuracy.  The drop-out worm feed control is mechanically interlocked to prevent simultaneous half-nut and spline shaft engagement.

 Clausing/Colchester Geared Head Specifications

 

Capacity Height of center 6.5”
  Swing over bed 13”
  Swing in gap 18.8”
  Width in front of faceplate 4.5”
  Swing over cross slide 8.26”
  Bedway width 12.5”

Headstock

Spindle bore 1.5”
  Spindle nose (camlock) D1-4
  Spindle nose taper 3MT
  Number of spindle speeds 12
  Spindle Speed Range (rpm) 40-2500
Cross/Top Slide Travel of cross slide 7.5”
  Width of cross slide 5.5”
  Travel of top slide 3.63”
Width of top slide 3.25”
Tailstock Quill travel 4.38”
  Quill diameter 1.63”
  Quill taper 3MT

Feeds & Threading

Longitudinal feed range 0.001”-.039” in/rev
  Number of inch pitches 35
  Range of inch pitches 2-56 TPI
  Number of metric pitches 39
  Range of metric pitches 0.2-14mm
  Number of diametral pitches 18
  Range of diametral pitches 8-56 DP
  Number of module pitches 18
  Range of module pitches 0.3-3.5 MOD
Motor Spindle motor 3 hp
Dimensions 8026J and 8026J1 13” x 25” G/H Gap
  Length x Height x Width 67” x 58” x 37”
  Weight 1,680 lbs.
  8027J and 8027J1 13” x 40” G/H Gap
  Length x Height x Width 82” x 58” x 37”
  Weight 1,960 lbs.

Standard Features

 

  • Center Bushing
  • Two 3MT Centers
  • Inch Threading Dial
  • Accuracy Chart
  • Parts and Instruction Manuals
  • Splash Guard
  • Coolant System
  • Set of Wrenches and Keys
  • 208/230 or 460 volt, 3 Phase, 60 hz. Motor (must specify voltage) (other voltages may require a transformer)

 

No videos are associated with this product

Manufacturer

Delivery

Can Order – Call for Delivery

Swing Over Bed

13"

Distance Between Centers

25", 40"

Voltage

1 PH/220 Volts, 3 PH/220 Volts

Similar Lathes