Marvel Spartan 20" Vertical Saw, Model S20V - NEW

Marvel Spartan 20" Vertical Saw, Model S20V - NEW

SKU # 2322008

STANDARD SPARTAN MODEL S-20V HIGH SPEED METAL CUTTING VERTICAL CONTOUR SAW WITH 3 H.P. 1" BLADE AND TILT TABLE

Blade:  .125" - 1; Blade Length 158-3/4" (The start up blade provided is 1/2" width, 12/14 TPI)

Machine Base:  The base is constructed from heavy gauge steel providing a rigid, heavy-duty foundation, reducing vibration during cutting even at high speeds.

Blade Guides:  The blade guides are universal V-type carbide with an adjustable carbide backup.  The V guides and the backup button are adjustable for the full range of blades from 0.125" to 1".

Blade Tension:  The manual blade tension device assures that no matter what width blade is being used the proper tension is achieved.  The tension indicator assures fast, easy and accurate settings.  The upper wheel has up to 3" of take-up.

Blade Speed:  Blade speeds are infinitely adjustable through a two-speed worm and worm gear transmission. Speeds of 50 - 415 and 550 - 5000  SFPM allow for cutting almost any type of material.

Blade Wheels:  Two (2) balanced cast iron blade wheels are pre-loaded with ball bearing hubs to assure long life even when running at high speed.  The rubber crowned tire mounted to each wheel preserves the blade's tooth set.

Upper Guide Arm:  The upper guide arm is adjustable for varying material sizes.  The guide arm is moved via hand wheel and rack and pinion device.  Once the correct height is set, the arm can then be locked in place. Maximum height is 12"

Table:  The saw is constructed of cast iron to reduce vibration while cutting and has one slot to the right of the blade to accommodate accessories and other fixturing.  The table tilts 45 degrees right and 10 degrees left.  Table size is 23.5" x 27.5" and has a work height of 40".

Blade Welder:  The blade welder has a capacity of 0.125" - 0.75".  With the annealer, grinder and blade shear, complete blades can be easily made to whatever length is required.  A blade can also be broken and re-welded for hole cutting.

Other Standard Features:
Work Light
Chip Blower
Electric Tachometer
Electrical Door Interlocks
Wheels Dia. 20.25"
Machine Wt. 1300 lbs.