Description
Clausing 15″ Swing Geared Head Gap Bed Lathe, Model 8043 – NEW
Prices subject to change every 10 days due to economic changes please call us to verify the price!
Clausing/Colchester Geared Head Lathe Features
- All head stock gears are hardened and ground
- Spindle bearing, gears and shafts are lubricated by a forced lubrication system
- An easy-to-read index plate makes it simple to select the proper feed rate or thread
- The apron has hardened and ground gears and are lubricated in a bath of oil
- Extra wide bed provides accuracy and minimal wear
- Easy access pull-out rolling chip bin
- Precision Gamet tapered roller spindle bearings
- Equipped with chuck guard, full splash guard and leadscrew cover
- Clutch drive, reverse leadscrew with spindle turning for faster thread cutting
- Clutches are operated by levers at apron and headstock for forward/reverse
- A one year warranty and backed by the Clausing Service Center dedicated to support our customers with parts and service
Clausing/Colchester Geared Head Specifications
| Capacity | Height of center | 7.68” |
| Swing over bed | 15.75” | |
| Swing in gap | 23” | |
| Width in front of faceplate | 6.5” | |
| Swing over cross slide | 9.7” | |
| Bedway width | 12.5” | |
Headstock |
Spindle bore | 2.12” |
| Spindle nose (camlock) | D1-6 | |
| Spindle nose taper | 4MT | |
| Number of spindle speeds | 16 | |
| Spindle Speed Range (rpm) | 25-2000 | |
| Cross/Top Slide | Travel of cross slide | 9.8” |
| Width of cross slide | 7.09” | |
| Travel of top slide | 5.1” | |
| Width of top slide | 3.93” | |
| Tailstock | Quill travel | 5.5” |
| Quill diameter | 2.8” | |
| Quill taper | 5MT | |
Feeds & Threading |
Longitudinal feed range | 0.0014”-0.048” in/rev |
| Number of inch pitches | 56 | |
| Range of inch pitches | 2-56 TPI | |
| Number of metric pitches | 51 | |
| Range of metric pitches | 0.2-14mm | |
| Number of diametral pitches | 20 | |
Feeds & Threading |
Range of diametral pitches | 8-56 DP |
| Cont. | Number of module pitches | 20 |
| Range of module pitches | 0.2-3.5 MOD | |
| Motor | Spindle motor | 7.5 hp |
| Dimensions | Swing & Center Distance | 15” x 50” / 15″ x 25′ |
8042 – 15″ x 25″ VS Gap Bed Lathe, Dimensions 75″ x 63″ x 44, 2970 lbs.
8043 – 15″ x 50″ VS Gap Bed Lathe, Dimensions 99″ x 63″ x 44″, 3,300 lbs.
Standard Equipment
- Chuck Guard Accuracy Chart
- Covered leadscrew
- Electric coolant pump, tank and fittings
- Emergency stop button
- End guard limit switch
- Forward/Reverse/Stop switch
- Lockable isolator switch
- Splash guard
- Tee slotted top slide
- One shot saddle and cross slide lubrication
- Pullout chip bin
- Thread indicator
- Tool box with wrenches and dead centers
- Instruction and spare parts manual
- 208/230 or 460 volts phase 60 Hz (other voltages may require a transformer)